|E book Particulars :|
Fluid Mechanics and Aerodynamics Thermodynamics and Thermotechnics Process Control
Parts set for demonstration of free floor in static situations (3 parts). Bourdon manometers calibration. Manometer vary: 0-2.5 bar. Manometers (vary: 0-500mm). Module to find out the Metacentric Top (FME11): Most angle: +/-13. Corresponding lineal dimension: +/- 90 mm. Dimension of the float: L=353mm, W=204mm, whole H=475mm. Module for learning the Hydrostatic Strain (FME08): Fluid Degree Meter (hook and level gauge) and Stream over Weirs (FME02): Module for learning Archimedes precept (lever stability with displacement vessel, bucket and cylinder). Set of weights (5, 10, 50, 100, 400, 1000, 2000, 5000 gr.).
One air pump and 2 water pumps. Common hydrometer (0-70 Baumé , 0.700 – 2.000 Sp/gr). Cease clock. Two 600 ml beakers. Spare components for the viscosimeter parts. Valves. Manuals: This unit is provided with 8 manuals. Dimensions (approx.): 1500 x 800 x 1900 mm. Weight: 200 Kg. The Laminar Stream Visualization Unit (LFA) permits an entire examine of the twodimensional issues related to the laminar movement by the use of the visualization of the completely different fashions of movement that may be visualized with the assistance of an environment friendly system of injection of colored liquid.
It’s outfitted with wheels for mobility and with brake to immobilize the unit throughout the practices. Anodized aluminium and metal construction. Process diagram within the entrance panel with comparable distribution to the weather in the actual unit. Laminar movement visualisation desk. Stream visualisation space. 8 sources and 8 drains. Control valves of the drains and sources. Enter management valves. Tank of ink. Manifold of ink. Draining valve. Tank on the enter and output of the work part. Grid to facilitate the visualisation of the traces of movement. The highest glass sheet of the visualisation space has handles to have the ability to elevate it with easiness for its right operation or to put in the completely different hydrodynamic fashions.
The central drain of the inferior badge, positioned within the visualisation space, has a double-shape, that’s to say, two orifices in neighborhood. The management techniques permit that each, or some, of the drains and sources are fed on the identical time. Colored liquid injection system, for a greater visualization of the traces of movement: 19 needles, positioned among the many glass sheets on the enter. By every needle an applicable amount of colouring is injected and the path is visualized with readability. It features a set of hydrodynamic fashions fashioned by: 3 round fashions: 40, 60 and 80 mm diameter. 3 sq. fashions: 40, 60 and 80 mm of size.
1 wingshape mannequin. Manuals: This unit is provided with 8 manuals Dimensions (approx.): 1600 x 1000 x 1250 mm. Weight: 60 Kg. Dimensions of the working space: 600 x 900 mm. With course of diagram within the entrance panel. The unit management parts are completely laptop managed. Simultaneous visualization within the laptop of all parameters concerned within the course of. Calibration of all sensors concerned within the course of. Actual time curves illustration. All of the actuators’ values will be modified at any time from the keyboard. Protect and filtered alerts to keep away from exterior interferences.
Download Fluid Mechanics and Aerodynamics Thermodynamics and Thermotechnics Process Control simply in PDF format at no cost